The meter can measure flows in pipes between 10 and 100 percent full and its non-contact sensor is not affected by oils and fats floating on the surface. In addition, TIDALFLUX has a broad diameter range to fit pipes up to DN1600 or 64 inches, and has high chemical and abrasion resistance to provide exceptional durability.

The accuracy in partially filled pipes is <1% of full scale, and the accuracy in full pipes is <1% of the measured value. TIDALFLUX 2300 does not require on-site calibration as it is wet-calibrated at factory in a direct comparison of volumes.

The in-line flowmeter is a closed measurement solution for a safe and clean working environment, replacing open channel measurements. The electrodes are mounted at a height of 10 % from the pipe bottom, ensuring that they are always wetted to avoid corrosion. The capacitive level sensors are integrated in the liner and have no contact with the medium.


More Water/Sewer Products