The Jackhammer Support Arm is a labor-saving device for electric jackhammers and other heavy power tools that supports the weight of the tool, allowing for total concentration on the job at hand. It has three setup options—tripod, scaffold, and shoring pole—each of which takes less than five minutes to assemble. Removable pins hinge each joint, making the device portable. Its universal clamping system allows for the attachment of most hammer drills. BCIT Institute of Technology. 604-434-5734. www.bcit.ca. Booth S21130.

The Makita 70-pound model HM1810 Breaker Hammer is powered by a 15-amp motor, delivering 1100 bpm and 63 joules of impact energy. The tool is equipped with the company's anti-vibration technology, a counterbalance system for three times less vibration. An automatic brush cutout system protects the commutator for longer tool life while a warning lamp indicates trouble with the 16.4-foot power cord. Makita USA Inc. 800-462-5482. www.makita.com. Booth C4037.

The Bosch 35-pound Demolition Hammer delivers 33 foot-pounds of impact energy and, unlike its heavy relatives, offers horizontal and vertical capabilities. The tool also features an active anti-vibration control, which decreases vibration by more than 70%. The tool lasts for 300 hours before maintenance is needed. Bosch Power Tools. 877-267-2499. www.boschtools.com. Booth O31776.

The Rider Rover ride-on trowel mover allows one person to move ride-on trowels on and off concrete slabs. Weighing less than 1200 pounds, the machine is 8 feet long, approximately 6 feet wide, and 6 feet high, allowing it to be transported in an enclosed or open trailer. It also can be transported piggyback with a ride-on trowel. Additional features include hydraulic steering, guide, and lift system. Rider Rover. 207-324-8118. www.sricher.com. Booth O30717.

As the first 8-ton excavator from Kubota, the KX080-3 features 14,660 pounds of bucket breakout force and can dig to depths of 15 feet. The machine includes twin auxiliary hydraulics with adjustable oil flow of up to 26 gpm. Additional features include load sensing hydraulics, a tight tailswing, an anti-theft system, electric refueling pump, two pattern selection system, and auto-downshift travel motors. Kubota Tractor Corp. 888-458-2682. www.kubota.com. Booth C6823.

The CBL40 compact backhoe loader features a load-sensing Hydro Mechanical Transmission that blends a hydrostatic transmission with a mechanical transmission. Its hydraulic system uses two variable displacement piston pumps, which allows simultaneous operation of the backhoe boom, arm, bucket, and swing function for maximum productivity. Yanmar Construction Equipment. 770-877-7595. www.yanmar.com. Booth C7680.

Ultra Trak is an automated pressurized high-speed application system for applying concrete chemicals. Suitable chemicals include sealers, finish coats, densifiers, moisture cure urethanes, and some epoxies. The system boasts 20,000 square feet per hour of productivity. Fas-Trak Industries. 708-570-0650. www.fas-trakind.com. Booth S14625.

Providing clean, dry heat, the XE1300 portable heater uses magnets and eddy currents as a heat-producing source. The currents produce no gaseous odors, emissions, or moisture, leaving the environment clean, dry, and comfortable. It easily converts from a portable heater to a surface heater for concrete curing and ground thawing. Standard propane and optional diesel models are available. MagTec Energy LLC. 877-624-4328. www.magtecenergy.com. Booth S11247.

Ultra-Modular IBC Spill Pallets use low-profile pallets and expansion tanks connected via bulkhead fittings. Each tank sits on a heavy-duty 75-gallon spill pallet that offers a uniformly distributed load capacity of 9000 pounds. Sharing sump capacity allows each system to meet EPA and SPCC spill containment regulations. UltraTech International Inc. 800-353-1611. www.spillcontainment.com. Booth S13523.

An integrated 50/60 Hz sensor makes it easy for the CX Concrete Radar system to locate energized conduits and other structures inside concrete before cutting or coring. Its newest feature is the 2.3 GHz high-resolution FCC-approved transducer for scanning floors, walls, and ceilings. Mala Geoscience USA Inc. 843-852-5021. www.malags.com. Booth S11910.