Maintainer Corporation of Iowa, Inc. is proud to announce the addition of two new 25’
hydraulic cranes to its innovative line of work truck cranes. The innovative new H12025
and H14025 telescopic cranes are engineered to provide more lifting capacity at
further distances from the truck. Each new crane boasts a 90,000 foot*pound
crane rating and have a reach of 25 feet. The H12025 has a maximum lift of 12,000
pounds, while the H14025 can lift 14,000 pounds. The cranes feature a planetary winch
mounted on the boom, which is an upgrade over Maintainer’s existing 12000 and 14000 crane models.

Customers received a sneak preview of the new crane earlier this year at ConExpo in Las
Vegas. Maintainer’s sales team received a lot of positive response. “As our customers perform maintenance on larger equipment, Maintainer continues to improve the capabilities, performance, and safety engineered into our products, said Tom Wibben, Sales Manager for Maintainer. “We believe the customers will be very satisfied with these latest crane upgrades for their service trucks.”

ADVANCED CRANE CONTROL (A.C.C.)
The two new cranes are also equipped with Maintainer’s latest Advanced Crane Control to monitor the stability of the crane during operation. New sensors have been installed that will monitor the tilt angle of the truck as well as the boom angle of the crane. If the system senses an out-of-level condition, it will warn the operator and even stop the crane rotation if necessary. The Advanced Crane Control system also monitors the rotational position of the crane to determine overall truck stability when making large lifts. This is a great feature for operators who normally manually calculate their loads and compare against their zone chart. “The technology can actually save money for the customer,” said Wibben. “This system eliminates the need for front outriggers on several service body types. The automatic zone stability calculation should reduce operator error and enhance safety on the job site.”

The Model H12025 & H14025 Cranes sport the following features:
? 5-Year limited structural crane warranty
? Low profile boom - no need for flip sheave
? Boom-Mounted planetary winch
? Increased line speed from 30 fpm to 60 fpm
? Block storage - easy and convenient
? Total operational range 91° (-13° to +78°)
? OSHA 1910.180/ANSI B30.5 compliant
? Low Profile Anti-Two block - standard
? Closed-center/load sensing hydraulic system (open center optional)
? 615° of boom rotation
? Wireless Remote with independently proportional controls

The hexagonal boom sections on Maintainer cranes are self-aligning, have improved strength to weight ratio, and have easily serviced wear pads. Nitrided cylinder rods have improved wear and impact resistance, improved corrosion resistance, and an improved seal life. The hydraulic hoses are protected from harsh working environments. Even the crane and outrigger valves are protected under the truck body. The initial crane inspection is performed at the factory for turnkey performance – your crane is ready to go work when your truck is delivered!

Maintainer Corporation of Iowa, Inc. www.maintainer.com

For more products, click here.