Launch Slideshow

Image

Winner pays all

Winner pays all

  • Image

    http://www.pwmag.com/Images/tmpAD6%2Etmp_tcm111-1344645.jpg?width=300

    true

    Image

    300

  • Image

    http://www.pwmag.com/Images/tmpAD7%2Etmp_tcm111-1344649.jpg?width=475

    true

    Image

    475

    During a reverse auction, suppliers only see their own bid and rank. They see no other data from competitors. Image: BidBridge

  • Image

    http://www.pwmag.com/Images/tmpAD8%2Etmp_tcm111-1344651.jpg?width=475

    true

    Image

    475

    When comparing a traditional paper method and electronic bidding, there are no differences in the process other than the ability to lower your bid. Image: American Public Works Association

  • Image

    http://www.pwmag.com/Images/tmpAD9%2Etmp_tcm111-1344655.jpg?width=300

    true

    Image

    300

    Bidders went wild during a reverse auction for waste collection services in Dallas, Ga., submitting 160 bids in 67 minutes with 22 first-place turnovers. Photo: City of Dallas, Ga.

  • Image

    http://www.pwmag.com/Images/tmpADA%2Etmp_tcm111-1344658.jpg?width=300

    true

    Image

    300

    During a reverse auction for 140-hp John Deere mowers for two airports, the Johnson County (Kan.) Public Works Department decided not to accept any bid and instead awarded a supplier who had submitted an earlier offer of $88,000. Photo: Johnson County

By: Michael Fielding

Although it's proven viable for the private sector, the reverse auction remains a small piece of the government-purchasing pie.

You'd think a procurement method that lets potential vendors keep lowering their offer would be a no-brainer for any organization locked into the lowest-price paradigm. Same with a method that doesn't penalize buyers for not awarding a bid. Or one that doesn't cost the buyer a penny to conduct.

But it's not. Of 326 public entity responses to a recent survey by the National Institute of Governmental Purchasing Inc. (NIGP), only 12 indicated they use reverse auctions. That's down slightly from 2003, when the institute reported that 17 out of 276 respondents used the method.

Periscope Holdings Inc. manages the commodity and services code, the standard that state and local governments use to identify their specifications, for the institute. At the behest of public customers, the firm developed software only to find that reverse auctions had fallen out of favor.

Part of the reason is that governments have been burned. “Every time the economy has gone down, we've seen several players jump into the government market from the private sector,” says CEO Brian Utley. “But they don't understand that it works differently. Government procurement is run by law.”

Despite its lack of popularity in recent years, the reverse auction method is still attracting all sorts of attention, most notably during the American Public Works Association's annual Congress in Columbus, Ohio, last year. Curious department heads and financial managers packed a room for a session about reverse auctions. As a result, we decided to examine the method more closely for our annual “money issue.”


Is your operation a good fit for reverse auctions?
  • Does your state allow this type of competitive procurement method?
  • Do your specifications allow for flexibility in suppliers' bids (e.g., variations on your stated specifications)? Do you have at least three bidders interested in participating?
  • Is your budget for the equipment/service at least $75,000?
  • Does your board require you to award a contract to the supplier who bid the lowest price, or can you award contracts to suppliers who bid higher? Can you limit the number of line items to fewer than 20? If so, are you willing to run a lump sum auction first and then have the bidders fill in the line items afterward?
  • Has your potential reverse auction service provider been in business for at least five years?

  • MYTH 1: REVERSE AUCTIONS WORK BETTER FOR EQUIPMENT AND COMMODITIES THAN SERVICE AND CONSTRUCTION CONTRACTS.

    In 2006, Pennsylvania Gov. Ed Rendell signed the Local Government Unit Electronic Bidding Act into law, allowing municipalities, school districts, councils of government, authorities, and others to incorporate electronic bidding and reverse auctions into their competitive bidding processes.

    Before then, most local governments were restricted by the competitive bidding language in their municipal codes. The law amended the state's procurement code to allow local governments to use electronic bidding and reverse auctions for their own purchases.

    The Delaware County Regional Water Quality Control Authority in Chester, Pa., immediately tried it out. That November, a reverse auction facilitated by eDynaQuote, which has since been acquired by Procurex, cut the cost on orders for liquid caustic soda and liquid chlorine by $87,500.

    “We could never have saved this much with the old paper process,” says the county's Procurement Coordinator Sue Hart. The agency has used the method every year since then. The winning bids shift among the same handful of suppliers, but each year the final price has been lower than the previous year. “It's easy. We just sit back and watch the results come in.”

    As a general rule, the buyer has achieved true market value if the two lowest bids differ by no more than 2%.

    In 2009 the City of Norton, Ohio, used a facilitator called BidBridge to find a contractor to replace 12,000 feet of water main. After an hour, 10 companies had submitted 283 bids, dropping the final price to $423,786 — a 40% savings over the engineer's estimate.

    It wasn't the city's first experience with reverse auctions. Two smaller water main projects yielded good results; the first came in 17% below the engineer's estimate, and the second was almost double that. So Administrator Rick Ryland decided that it would likely produce significant savings for the larger project.

    And in February, the 10,500-resident city of Dallas, Ga., shaved almost half — 44% — off its original budget of $500,000 on a two-year waste collection contract for 2,700 residential waste pickups and a handful of commercial pickups, also using BidBridge.

    MYTH 2: A REVERSE AUCTION WON'T EXPAND MY POOL OF POTENTIAL VENDORS.

    Facilitators such as eDynaQuote and Bid-Bridge organize the event by alerting their customer's current supplier list, combing through their own database, and seeking new suppliers based on the parameters set by the public works department, such as a preference for locally based suppliers.

    The companies review bid documents for specifications that could potentially restrict competition, adding — for example — language that opens the field to minority- or veteran-owned businesses.

    Although the client has to put some work in as well, you're only as limited as you choose to be.

    After the city's previous waste hauler went bankrupt last year, Dallas, Ga., City Manager Kendall Smith negotiated a month-to-month contract with Raleigh, N.C.-based Waste Industries USA Inc. before deciding to send out requests for proposals (RFP) and qualifications in hopes of finding a long-term replacement.

    None of the respondents met all the city's requirements. So Smith, who'd spent 18 years as the city's public works director, did some research.

    He lowered the previous requirement of proof of a previous contract of at least five years for governments of more than 3,000 customers to attract larger local contractors that had plenty of successful commercial and residential work but little government experience. After learning that some of the largest nearby cities didn't require such large policies, he reduced the requirement for a $10 million umbrella insurance policy to $3 million. He also added a restriction that vendors would not be allowed to raise the fuel cost.

    That expanded the field to 13.

    It's simpler to maintain a customer account than win a new one, so incumbents often get more aggressive with their pricing to keep existing business. And that's what happened.

    In the last half hour of the auction, Waste Industries dropped its original quote of $389,786 by about $50,000 as competitors outbid each other. The company won the award with a final bid of $280,850. Of that, it paid BidBridge a small percentage.

    And that's who keeps reverse auction facilitators in business: the winning bidder. The fee is 2% to 5% of the final bid.

    “Reverse auctions do drive pricing down, but compared to the traditional bid process, you have the opportunity to come back with another number,” says Jim Auten, vice president of marketing & sales for Waste Industries. It was the first experience with a reverse auction for the company, which also operates in South Carolina, Maryland, Tennessee, and Virginia. “It was certainly more exciting than the traditional bid process. I felt like I was in Vegas.”

    That said, contractors generally oppose reverse auctions, arguing that material quality and contractor experience aren't taken into consideration during the bidding process. In Ohio, House Democrats slipped a provision into the state budget last year banning reverse auctions for the purchase of supplies or services in road, building, and sewer projects. The Associated General Contractors of America did not return calls from PUBLIC WORKS for comment.